The growing society requires that the criteria for fire safety are also improved.
In 2020, along with the Ministry of Construction promulgating the standard QCVN 06:2020/BXD (National technical regulation on fire safety for houses and works), the Fire and Rescue Police Department also issued the Decree ND136 detailing a number of articles and measures to implement the Law on Fire Prevention and Fighting and the Law amending and supplementing a number of articles of the Law on Fire Prevention and Fighting.
The introduction of these two legal documents is a big step forward in quality, requiring businesses to immediately adapt by urgently researching and improving product quality.
After three months since the establishment of the Product Research and Development Team, Goonam Vina Co., Ltd. has achieved impressive research results: successful research and self-control of the EI fire prevention core according to the new standard, especially, the fire-blocking core is 35-50% lighter than many other companies’ products of the same level.CONTACT NOW
- Roller roller: is a steel pipe shaft 168 ~ 250 mm thickness from 1.98 mm.;
- Door spokes: help prevent smoke and protect objects inside: made of electroplated steel, with a thickness of 1.2 ~ 1.6 mm;
- Normal rolling door / emergency rolling door: steel sheet thickness from 0.8 ~ 1.6 mm depending on size/requirement;
- Fire doors E 120: steel sheets from 1.2 ~ 1.6 mm thick depending on size/requirement;
- Bottom bar: T-shaped to help balance gravity for the door body: made of steel or stainless steel (stainless steel) with a thickness of 1.2 mm
- Directional rails: help ensure stability when operating the door: box type 100 x 100 mm made of steel or stainless steel (stainless steel) with a thickness of 1.2 ~ 1.6 mm
- Roller cover box: the skeleton is made of a box of 20 x 40 x 1.0 mm and the outside is covered with a layer of galvanized steel from 0.8 mm thick
- Motor: YH (Taiwan – China) or KST (Korea)
- Minimum size: 2.5 x 2.8 m Max: 8.5 x 10 m
- Ordinary rolling door
- Exit roller door
- Fire-proof rolling door E 120
- Unpainted (color of original zinc corrugated iron)
- Powder Coating
- Epoxy paint
Electrical equipment part
- Motor: YH (Taiwan) or YH (China) or KST (Korea)
- Timer control box: the fire door is equipped with a timer circuit to control the stroke of the door;
The automatic deceleration mechanism is activated from the fire alarm system, heat or smoke detector when receiving a fire alarm signal, the control box provides power to the door level control motor, which gradually decreases in case of emergency. , the operation door goes down and is stopped at the pre-set level. After a fixed time, the door continues to close, preventing fire and preventing smoke from spreading to other areas.
- UPS (backup power source):
– UPS equipment can provide temporary power when the main power is lost; – Backup time: up to 48 hours after power failure; – Full charge time: 14 hours.